by Brad Daniels | Feb 17, 2019 | Oxwood Luthier Updates
As you may have seen, I’ve been working on adding the tapers to my molds in an effort to improve consistency as well as efficiency in my process. I made a video that you can see here if you haven’t already. The video was mostly for entertainment purposes for those... by Brad Daniels | Feb 8, 2019 | Oxwood Luthier Updates
Something I’ve been putting off for years and years, and when I came down to it, it wasn’t nearly as bad as I’d expected. Once I sat down and considered how I might actually go about this, it happened rather easily. Here’s a video of how I got it done! Thanks... by Brad Daniels | Feb 7, 2019 | Oxwood Luthier Updates
I think it’s important to start out by saying that everything that I’m finding and the conclusions that I’m making are all within the parameters of the way I build in every other aspect of the process. I am finding things that do and do not work for me; and they may... by Brad Daniels | Jan 25, 2019 | Oxwood Luthier Updates
About 10 years ago I stumbled across this bit while browsing the internet for guitar making information. At the time I was building a slotted headstock, so I was delighted to come across a safer alternative to a bearing router. And at that time, my woodworking skillls... by Brad Daniels | Jan 20, 2019 | Oxwood Luthier Updates
A few years ago I built this OM out of Black Limba and SItka Spruce. I don’t know why, I was just never really satisfied with it. It sounded good enough, but when I started out building it I’d thought that I was onto something. When I first strung it up I was stunned....